KS1-XW Packer 
KS1-XW Packer meets the requirements for production, stimulation, and injection applications.
The full-opening design provides unrestricted flow and allows wireline tools to pass. Mechanical lock-setting action holds substantial pressures from above or below without tubing weight or tension. A large internal bypass reduces the swabbing effect when running or retrieving. The bypass closes when the packer is set and opens before releasing the upper slips to allow for pressure equalization.
KS1-XW Packer
KS-3 Packer
The KS-3 Packer is a single-grip packer without an upper hold-down device for use in wells that contain negligible differential pressure from below.
The tool is set by a quarter-turn to the right at the packer then compression-set with set down weight. The packer is released by straight pick-up and features a large bypass area to prevent swabbing of elements during run-in and retrieval.
Features
- Perfect for gas lift wells
- Large internal bypass
- Straight pick-up release
- Full bore opening for fluid flow and wireline tool access
KS-3 Packer
K-10 Packer
The K-10 Packer is a retrievable packer that functions like a permanent drillable packer.
It is ideal for injection, production, and zone isolation functions. Once set, it mechanically locks eliminating movement and will hold pressure from above or below with no requirement for set down weight, tension, or hydraulic hold down to maintain its pack-off. When run with an on/off tool, the tubing string can be disconnected and removed while the packer is left in its set position. Due to its short length, the K-10 is extremely useful in highly deviated wells and is designed to withstand up to 10,000 psi differential pressure. Carbide-tipped slips and drag blocks.
K-10 Packer
CSP ROTATIONAL PACKER
The CSP Packer is a left rotation set packer designed to run below a down hole gas separator.
It uses a Tubing Anchor Catcher to anchor the packer to the casing. After the packer is set there is no movement to wear out the slips or other parts, allowing it to stay set under the most severe conditions.
Features
- Compact
- Easy to set and release
- Tubing can be left in tension, compression, or neutral
- Built-in fluid bypass for running and retrieving
CSP ROTATIONAL PACKER
Hydraulic Tandem Packer
The Innovex Hydraulic Tandem Packer is designed for isolation of several zones for water flow and remedial work.
One or more may be run above or below a tension or compression set packer. This packer consists of a packing element system, a setting piston that is activated by tubing pressure, and a locking device that maintains pack-off after pressure differential is removed. Adjustable shear screw to prevent premature setting.
Features
- Available with Nickel Coating
Hydraulic Tandem Packer
Scab Liner Assembly
The Scab Liner Assembly is an economical method of isolating casing leaks or existing perforations in producing and injection wells.
It can eliminate repetitive squeezing and the need to install a full liner. This assembly is mechanically set, fully retrievable in a single trip, and incorporates a unique design with large bore sizes that enable standard tubing to run through the liner.
Features
- Available with Nickel Coating
Scab Liner Assembly
