WLTC Retrievable Bridge Plug 
Innovex’s WLTC Retrievable Bridge Plug is designed to perform all tasks normally required of a tubing run packer-type bridge plug and can be quickly converted to run and set on wireline.
The WLTC Plug can be run and set on wireline in a way that allows the tool to be re-set with tubing in a different location before removing it from the well. It is designed to be rugged and compact (the 4-1/2” size is only 63 inches long). When run on tubing, the WLTC can be set deep or shallow because the packing element system can be energized with compression or tension. This bridge plug will withstand high differential pressures from above or below, while its internal bypass valve is easily opened to equalize fully prior to release.
WLTC Wireline Adapter Kit also available.
WLTC Retrievable Bridge Plug
Spring Loaded Overshot
The Spring-Loaded Overshot is designed to run and retrieve the Innovex WLTC Retrievable Bridge Plug.
A force of several hundred pounds (varies with size) is required to install the overshot onto the bridge plug. After the plug is run to the desired location and set, the tubing string can be released from the plug by holding left- hand torque in the down position and picking up. Cutting teeth are provided on the wash over shoe of the overshot to help cut through sand and debris.
Spring Loaded Overshot
WLTC Ball Catcher
The Innovex WLTC Ball Catcher can be used for running on tubing or wireline to collect ball sealers not trapped in the perforation after frac operations.
Features
- Available in multiple size and ball capacity options.
WLTC Ball Catcher
