With 360 degrees of coverage, tungsten carbide buttons and an eccentric nose, the VEXREAM Reamer Shoe will guide the casing to total depth around any wellbore obstructions.
Compatible with all casing and liner hanger assemblies, the VEXREAM provides highly effective protection against unexpected and anticipated casing and liner running problems. Expertly designed to handle difficult wellbore conditions including swelling shale, ledges, and washed-out pockets of wellbore. Connections are available upon request in all premium formats.
704-RC VEXREAM Guide Shoe
The valveless 704 series guide shoe incorporates the reamer guide shoe style, which increases flow to allow it to run in conjunction with the AutoFill Float Collar.
707/717-RC VEXREAM with IIIC Valve
The 707 series is furnished with an FGMax 1 plunger valve tested to API RP 10F Category IIIC requirements. For larger diameter casing sizes, the 717 Series features the FGMax 2 for flow rates of approximately 20 bpm.
Reduce drill out time, improve casing shoe ability. The BridgeBUSTER offers a range of options for increased drilling efficiencies and reduced NPT.
The shoes protect casing integrity, make it possible to ream to planned TD and facilitate casing runs and cementing. The tool is a reamer shoe designed to be run on the bottom of the casing or liner to enable strings to be washed, rotated, and reamed to planned TD. The BridgeBUSTER fitted with the FastDRILL nose reduces the time required to drill out while still maintaining high compressive strength. Minimizes the risk to BHA. Provides low-cost improvement in operational efficiency. Improves bit performance.
Features
Fast drill out eccentric aluminum nose
360 degree cutting structure coverage
Large flow by area
Short compact design
Matched to client casing weights and treads
Hollow tool
Can be provided with shear out flotation plugs
Right hand spiral stabilizer
Casing shoe bore protection
Reamer Shoes
Compatible with all casing and liner hanger assemblies, the Innovex reamer shoe provides highly effective protection against unexpected or anticipated casing and liner running problems.
It has been expertly designed to handle difficult wellbore conditions such as swelling shale, ledges, and washed-out pockets of wellbore. Connections are available upon request in most API and Premium formats.
Furnished with the FGMax™ 1 plunger valve tested to API RP 10F Category IIIC requirements, the 707 Series guides the casing to total depth around any wellbore obstructions thanks to the eccentric nose. For larger diameter casing sizes, the 717 Series Reamer Shoe features the FGMax 2 for flow rates about 10 bpm. It is compatible with all casing and liner hanger assembles.
Guide Shoes
Craggy rock ledges and washouts are no match for Innovex guide shoes. The wide, rounded cement nose, and unique cement formula maximize shock resistance and ensure a smooth run every time.
This guide shoe is saw-cut to make teeth like steel blades at the end of the shoe to reinforce the end of the casing on shallow strings. Innovex’s 322 Series provides a solution for formation swelling into the wellbore by maintain the wellbore ID to coupling diameter. This guide shoe allows the casing to be slowly rotated to cut past obstacles in the hole.
- Exit Search X